Published at Friday, July 13th, 2018 - 02:38:45 AM. . By Phoenix Mahan.
Cut your plywood base to the desired dimension. We’re using an 18-inch square carpet tile for this scratcher. Use the sand paper to smooth any rough edges. DIY scratch base saw. Using your straight edge and pencil, draw a line from corner to corner on the plywood. Repeat from the opposite corners. They will intersect in the center. Next, mark two screw locations based on the diameter of your log. Since ours was 5 inches thick, we marked our holes 3 inches apart to leave some room between the screw and the outer edge of the log.
For many proud cat owners, having a cat is wonderful. Being a cat owner is growing in popularity because it is often hard for someone to own a dog in an apartment. Most landlords are dead set against allowing a dog into their house for the fear of damage to the property. However, cats enjoy scratching and digging their claws into things. It is important, especially if you do not own your home, that you teach your cat to scratch in an you to appropriate area. The best way for keep your furniture in good condition and free of claw marks from your cat is to provide a scratch post. This will give your furry friend a way to safely mark his or her territory and stretch, without damaging your belongings. Don't be misled into thinking a scratching post needs to be costly.
Any content, trademark’s, or other material that might be found on the Proboards86 website that is not Proboards86’s property remains the copyright of its respective owner/s. In no way does Proboards86 claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 Proboards86. All Rights Reserved.