Published at Saturday, July 14th, 2018 - 05:27:42 AM. . By Eve Woodall.
What You’ll Need : Tree Log – Recommend using a hardwood like Oak, Maple or Redwood with the bark intact. The log should be at least 2 inches in diameter and around 3 feet in length. We’re repurposing a Walnut limb that came down in a storm. Scrap Wood for Base - We’re using ¾-inch plywood at least 16 inches square. Just make sure it’s non-toxic and unfinished.
A Carpet Square or remnant at least 16 inches square – You can get either from a home improvement or flooring store. A pencil, A staple gun or strong double-sided tape, Two (2) 3-inch wood screws, A straight edge, An electric drillscrew driver with bits and driver heads, A saw, Sand paper, Eye and ear protection. Optional: Sisal cord rope from a home improvement store. Sisal comes in a variety of widths. The wider the rope, the longer it will last. You’ll need approximately 50 feet of rope.
Any content, trademark’s, or other material that might be found on the Proboards86 website that is not Proboards86’s property remains the copyright of its respective owner/s. In no way does Proboards86 claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 Proboards86. All Rights Reserved.