Published at Tuesday, July 10th, 2018 - 03:50:16 AM. . By Lilith Dowling.
Drill two pilot holes for the screws in the locations you’ve marked. Trim some lengths of the double sided tape and run them along the outer edge of your plywood base. And run some additional lengths from the corners in towards the center. If you use a carpet remnant, you’ll want to wrap it around the base like you’re stretching a canvas and use the staple gun to attach the carpet to the underside of the base.
Either option works well. And allows you the flexibility to replace the carpet when it wears out or you want to change the look. Peel the backing off the double sided tape and affix your carpet square to the base. Try to align the edge of the carpet square flush with the edge of your plywood base. DIY scratch carpet - Working from the bottom of the base, drive the two wood screws through the pilot holes so they just poke through the carpet on the other side.
Any content, trademark’s, or other material that might be found on the Proboards86 website that is not Proboards86’s property remains the copyright of its respective owner/s. In no way does Proboards86 claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 Proboards86. All Rights Reserved.