Published at Tuesday, July 17th, 2018 - 12:31:03 PM. . By Romane Wisniewski.
Optional - Vertically staple one end of your sisal rope to the bottom of your log. Begin to wrap the rope as tightly as possible around the log until you get around 6 inches from the top of the log. Vertically staple that end and trim any remaining rope. Make sure you staple vertically to prevent your cat from catching claws on the staples.
Cut your plywood base to the desired dimension. We’re using an 18-inch square carpet tile for this scratcher. Use the sand paper to smooth any rough edges. DIY scratch base saw. Using your straight edge and pencil, draw a line from corner to corner on the plywood. Repeat from the opposite corners. They will intersect in the center. Next, mark two screw locations based on the diameter of your log. Since ours was 5 inches thick, we marked our holes 3 inches apart to leave some room between the screw and the outer edge of the log.
Any content, trademark’s, or other material that might be found on the Proboards86 website that is not Proboards86’s property remains the copyright of its respective owner/s. In no way does Proboards86 claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 Proboards86. All Rights Reserved.