Published at Thursday, May 24th, 2018 - 06:28:58 AM. . By Lilith Dowling.
Cut your plywood base to the desired dimension. We’re using an 18-inch square carpet tile for this scratcher. Use the sand paper to smooth any rough edges. DIY scratch base saw. Using your straight edge and pencil, draw a line from corner to corner on the plywood. Repeat from the opposite corners. They will intersect in the center. Next, mark two screw locations based on the diameter of your log. Since ours was 5 inches thick, we marked our holes 3 inches apart to leave some room between the screw and the outer edge of the log.
Correcting the bad behavior with your voice by saying naughty kitty will be understood. You have to be consistent however and patient, and continue to take the cat to the scratching posts. In the beginning you will have to keep an eye on what your cat is doing and catch her before she digs her claws in your furniture or carpet. Your cat will soon understand what you expect of her. Reward good behavior with a cat treat.
Any content, trademark’s, or other material that might be found on the Proboards86 website that is not Proboards86’s property remains the copyright of its respective owner/s. In no way does Proboards86 claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 Proboards86. All Rights Reserved.